Rated Line Voltage |
Rated Input Current |
Rated Input Frequency |
Rated Input Power |
Power Supply Output (per power supply) | 300 W (at 100 V ac) Recommendation: If you are inexperienced with updating HP device drivers manually, we highly recommend downloading the. Hp laserjet 6mp driver windows xp. Solvusoft: Microsoft Gold Certified Company Recognized for best-in-class capabilities as an ISV (Independent Software Vendor) Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of completence and excellence in software development. This tool will download and update the correct HP LaserJet 6p (6 Series) driver versions automatically, protecting you against installing the wrong LaserJet 6p drivers. 300 W (at 200 V ac)
|
300 W (at 100 V ac) 300 W (at 200 V ac)
|
Operating | 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System may shut down if operating with a fan fault or above 42°C (107.6°F). |
-35° to 65° C (-31° to 149° F). Maximum rate of change is 20°C/hr (36°F/hr). |
Operating | 10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. |
10% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. |
Operating | 3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 609 m/min (2000 ft/min). |
9144 m (30,000 ft)Maximum allowable altitude change rate is 609 m/min (2000 ft/min). |
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). |
|
|
NOTE: The listed sound levels above apply to standard SATA configurations.Additional options may result in increased sound levels. |
FCC Rating |
Normative Standards | EN55022 FCC CFR 47, Pt 15 CNS13438 EN 61000-3-2 EN 60950-1; IEC 60950-1 |
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. |
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive (458947-B21) | 160,041MB |
26.1 mm (1.028 in) |
101.6 mm (4.00 in) |
147.0 mm (5.787 in) |
Serial ATA |
3 Gb/s |
Supported |
2.0 ms | <11 ms | 22.0 ms | 7,200 rpm |
|
|
Operating Temperature (system inlet air temperature) |
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive (571232-B21) | 250,059MB |
26.1 mm (1.028 in) |
101.6 mm (4.00 in) |
147.0 mm (5.787 in) |
Serial ATA |
3 Gb/s |
Supported |
2.0 ms | 11 ms | 21.0 ms | 7,200 rpm |
|
|
Operating Temperature(system inlet air temperature) |
HP Half-Height 16X Max SATA DVD-ROM Optical Drive | Applicable Disk | CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2) Mixed Mode (Audio and Data combined) |
Capacity | 8.54GB (DVD-9) |
DVD Media |
Interface | 3 Gb/s |
Random |
Full-Stroke |
Data Transfer Rate | 8100 to 21600 KB/s (6X to 16X) |
N/A |
Start-up Time (typical) | <7 seconds |
N/A |
Laser Parameters | Semiconductor Laser GaA1As |
780 ± 25 nm |
Temperature |
Humidity |
Dimensions | 42.9 x 150 x 195 mm (1.7 x 5.85 x 8.11 in) |
1.2 kg (2.64 lb) |
Embedded NC107i PCIe Gigabit Server Adapter (Embedded) | Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver |
Compliant to x1 PCIe Specification |
BCM5723 |
10Base-T (Half-Duplex) |
10Base-T (Full-Duplex) |
100Base-TX (Half-Duplex) |
100Base-TX (Full-Duplex) |
1000Base-TX (Half and Full-Duplex) |
Hardware Interface | RJ-45 connector |
Cable Support | Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet on standard Category 5 UTP |